Rob Allen Impact Spears are designed to fit all Euro gun mechanisms. Engineered from ultra tough oil quenched Carbon alloy spring steel thet are tempered to 2100Mpa.

Tri-cut tips (only available in 6.6mm, 7mm & 7.5mm) ensure excellent penetration while the rocktip(only available in 6.3mm) is designed for close quater reef fish hunting. 270 degree polished wishbone notches and polished line holes (available in both single & double notch configurations) ensure minimum wear.

Each spear is mechanically decoiled from the heat treated bulk roll and hand straightened and quality checked before machining.

Quatro Phase coating ensures corrosion protection four to five times better than conventional Electrogalvanising.

Rock Tips are only available on 6.3mm spears and Tri Cut tips are only available on 6.6mm 7mm and 7.5mm spears.


(Rock Tip only)
A fast, flat trajectory spear for smaller fish. The double tricut rocktip helps to prevent jamming in cracks when cave hunting. Best with single 16mm band on shorter guns.

6.3mm spear single notch 90cm - 190cm
Code: S63NS1N9 - S63NS1N19
6.3mm spear double notch 90cm - 190cm
Code: S63NS2N9 - S63NS2N19


(Tri Cut Tip only)
A fast spear with increased hitting power. Used for smaller Reeffish or larger, soft bodied, fish such as Mackerel. Best with single 16mm or 18mm band.

6.6mm spear single notch 90cm - 200cm
Code: S66NS1N9 - S66NS1N20
6.6mm spear double notch 90cm - 200cm
Code: S66NS2N9 - S66NS2N20


(Tri Cut Tip only)
Designed for good speed and excellent penetration, 7mm shafts are a good all round choice for larger fish. Best with a single 18mm, 20mm or double 16mm band depending on the length of the gun and power required.

7mm spear single notch 100cm - 200cm
Code: S7NS1N10 - S7NS1F20
7mm spear double notch 100cm - 200cm
Code: S7NS2N10 - S7NS2N20
7mm spear double pin 100cm - 200cm
Code: S7NS2F10 - S7NS2F20

7mm spears are available with
pinned notches as an alternative to full notches.


(Tri Cut Tip only)
Designed to penetrate large deep bodied fish at longer range, 7.5mm shafts retain much of the kinetic energy at the edge of their range. Best with 2 x 16mm rubbers.

7.5mm spear single notch 100cm - 200cm
Code: S75NS1N10 - S75NS1N20
7.5mm spear double notch 100cm - 200cm
Code: S75NS2N10 - S75NS2N20
7.5mm spear double pin 100cm - 200cm
Code: S75NS2F10 - S75NS2F20

7.5mm spears are available with
pinned notches as an alternative to full notches.